Complete Fingerboards by Size: Which Set for Which Rider
Buying a complete set beats assembling parts for a first or second board: it is cheaper, it works out of the box, and it teaches you what you actually want from parts later. 34mm all-round sets suit most riders, 32mm sets suit fast technical styles and smaller hands, and 36mm sets suit park riding and bigger hands. This guide maps each size to the right kind of set.
32mm Fingerboard Complete — Deep Concave, Alloy Trucks & Bearings
Match the Set to the Rider
First board or gift: pick a 34mm maple complete with alloy trucks. It is the size the widest range of riders gets on with, and alloy trucks turn a toy into something that behaves like a board. Wooden-deck sets with single-axle trucks are cheaper and fine for younger riders, but they will not teach technique the same way.
Second board for tricks: a 32mm complete pushes fast flip tricks and combos. Riders with smaller hands often prefer 32mm permanently; riders with bigger hands usually keep one for flatground sessions.
Park and bowl riders: 36mm completes give the landing area and stability that transition lines reward. Pair with bearing wheels and the setup rolls through park lines without stalling.
What to Check Before Buying Any Complete
Truck axles: bearing or at least alloy axles turn the width from a number into feel. Single-axle trucks are the weakest link in cheap completes.
Grip and deck finish: a deck with pre-cut foam or grip tape saves a step; raw decks need taping. Dyed veneer decks vary per press — if the exact colour matters, ask before ordering rather than after.
Spares: sets that include a spare deck or spare wheels earn their price back. Decks wear, and a two-pack keeps a setup alive while one deck rests.
Size to set, quickly
| Size | Rider | Set type | Price band |
|---|---|---|---|
| 29mm | Small hands, technical | Wooden complete, single axle | $10-20 |
| 32mm | Fast flip tricks | Maple complete, alloy trucks | $20-35 |
| 34mm | Most riders | Pro maple complete, bearing wheels | $25-45 |
| 36mm | Park and bowl | Wide maple complete, bearing wheels | $30-45 |
Frequently asked questions
Is a complete set cheaper than building parts?+
Almost always for the first board — parts bought individually carry packaging and shipping that a boxed set spreads across the whole setup.
Can I upgrade a complete later?+
Yes, that is the point. Trucks and wheels swap with a screwdriver; decks swap with four nuts. Buy the complete for the deck and wheels, keep the trucks if they are alloy.
What width do pro riders use?+
There is no single pro standard — street technicians often ride 32-34mm, park-focused riders 34-36mm. Ride what your hands like, not what a pro list says.
Ready to build?
Shop precision completes, decks, molds, and hardware from the Lab.