Dyed Maple Veneer Sheets — Fingerboard Pressing

Natural dyed maple veneer at 0.5mm thickness — the material that turns a mold into a finished deck. Sixteen colourways mean the visible plies in your build can be a deliberate design choice rather than an afterthought.

Why this one

• 0.5mm thickness is the standard for fingerboard deck pressing, giving the right balance of flexibility during the press and rigidity in the finished board.
• Each sheet is 20×50cm — large enough to yield multiple deck cuts from a single piece, reducing offcuts and cost per deck.
• Natural dyed maple holds colour through the pressing process, so the finished deck shows the tone you selected, not a bleached or darkened version of it.
• Sixteen colourways from undyed natural through to bright blue, turquoise, and light pink let you build a deck with intentional graphic layers.
• Compatible with all standard fingerboard molds — the 0.5mm specification is consistent with what the molds in this range are sized to press.

Specifications

Who it suits

Any builder who has a mold and is ready to press their first or next deck. The undyed natural colourway suits builders focused purely on construction; the dyed options suit anyone who wants the cross-section of the deck to show colour when viewed from the rails or nose. Pair with any mold in the range and consult our deck-pressing guide for veneer layering advice.

Hand-picked and quality-checked before dispatch. Free sticker sheet in every box, and 30-day returns if it is not right for you.